Here we are coming to give you information about how to buy Swiss replica watches:
Of course, we need to determine what is Swiss made. Like the picture below, you can clearly see that there is a trademark of “Swiss made”, which can indicate the trademark of maker or seller’s nationality. The trademark has a high worldwide reputation. For decades, “Swiss made” has build a high-quality image in the world. Because the mark of origin is more convincing, and tell the real manufacturers from others better.
Then, we will check the appearance of Swiss watch parts. Trachoma and the case should be no visible scratches, the angular symmetry; back cover and at the rotary joint on the shell should be tightly; two tables ring the same distance with the case, install the ear hole Juan pin the tail on the case should be unbiased position of center, the appropriate depth of the hole, so easy to fall off the table ring; table mirror should be no defects and scratches, transparent light; three-pin is installed correctly, the needle with the needle, the table should exist between the mirror and dial the correct security clearance; dial and pointer coating finish is good, there is no scar, dial the full scale lines or luminous points; head with the case are about 0.1-0.3mm between the gap.
Next, we should check the sensitivity of Swiss watch. The sensitivity of the watch’s balance wheel is that it automatically swing flexibility. Would not had winding watch has stopped moving gently shake, shake with the power to observe the second hand move: if the second hand stopped moving in a very short period of time, then only watch the full winding can completed all (ie, winding no torque), high sensitivity; if the second hand for a long time to move, then only watch on the full winding can not be completed all (ie, winding also stored torque), the sensitivity is not high or table machine defective. Will not stop walking on the ever winding watches, and slowly turning his head to observe the second hand start: The rotation of the bar to less description of the second hand start the sooner the higher the sensitivity of the table; otherwise low sensitivity or table machine there are other faults. But pay attention to put the watch as soon gossamer stiffness than the conventional frequency (18,000 cycles / hour) on the table little more than winding confidential to swing. High sensitivity watch, on foot, after winding a long time continued walking.
Forth, it’s turn to the the spacing and location of the pointer watch. Watch hand and table mirror, and between the dial should be between three-pin to maintain a certain distance, or have another machine grazing affect the normal operation of the table. Check the needle can be observed through the dial. Hour and minute hands of the location and interaction is normal way to check is: the minute hand and hour hand appropriated 3:00, 9:00, observe whether the two pins at right angles; appropriated for 6:00, two pins are not in a straight line; appropriated for 12 points, whether the coincidence of the two needles.
Fifth, check the watch section agencies. The normal watch section should be easy. Turn the head section, the first think loose, gradually more and more tightly on, when the rotating head can not continue to move forward, that spring has been completely filled and agencies working on the article. If you turn the handle the head bar, the place “Cha Cha” abnormal noise, or produce such phenomena as the top gear skid, then a failure on the article body.
The reason why we want to check so much part of the Swiss watch of high quality because the real decisions are value for money. Swiss watch sales in the footprints all over the world, the Swiss watch industry exports 95% of the products for overseas, 1997, in value terms, exports are sold to Asia and Oceania, 39%, 36% exported to Europe, 15% sold in North America, sold to the Middle East 6%, 3% are sold in Latin America, 1% are sold to Africa. According to figures released by Association of Swiss watch: Swiss watches in 1998 for the 33.9 million total production output value of 8.236 billion Swiss francs, watch exports 75.71 billion Swiss francs, far more than its competitors, Hong Kong (922 million Swiss francs), Japan (661 million Swiss francs), Germany (3.9 million Swiss francs) and other, ranking first in the world. Swiss watch sales market mainly: United States (16%), Hong Kong (12.9%), Japan (9.3%), Italy (9.3%), Germany (8.5%), France (6.1%) and other countries and regions. The components, the clock exports account, in 1998, the Swiss watch industry exports of 8.422 billion Swiss francs, representing the total value of Swiss exports of the industry 7.3%, the third largest export industry for the Swiss. I believe in the present situation, far beyond the perious 7.3%.
In addition, the Rolex of solemn, practical and the Swatch of fashion, freedom, and the Rado of elegant design, high quality boutique are very representative of the Swiss watch brand.